Dial-A-Jet PATENTED
Fuel Induction System
Accurate Jetting in Seconds

SNOWMOBILE APPLICATIONS

We all buy snowmobiles for a certain level of performance whether its a 50 HP sled or a 100 or 125 HP sled. You can easily lose 15% of your total horsepower with improper jetting. The jetting can be wrong for a number of reasons. Temperature and altitude play a major role.

To really stay on top of your performance, you need to rejet approximately every 10^o temperature change or every 1000 feet of altitude change. Ask any racer - they rejet more often than this. Its really amazing that some consumers will run out and spend $300 to $700 for a set of pipes that produce a 10% to 15% increase while ignoring the big loss of horsepower due to poor jetting, not to mention the fuel mileage loss. In defense of riders that do this, we realize its 1997 and certainly no fun to take your carburetors apart repeatedly, especially with that crowded engine compartment.

Get a set of DIAL-A-JETs!! They are inexpensive, work extremely well, and are very reliable as well as fitting on any carburetor or sled. It's the new Millennium - if you really want performance, get a set of Dial-A-Jets.

More detailed information may be obtained by reading one or more of the articles in the MEDIA section.

*DJ-210-1YAM and DJ-211-1YAM include float bowl fittings that replace the drain screw in the float bowl.  This allows for an easier installation with no drilling and tapping in the float bowl.

** DJ-210-1X includes one right hand and one left hand body.  Fits Yamaha and some other models where a 10:00 o'clock and 2:00 o'clock mounting position is preferred.

Dually Kits are based on two Dial-A-Jets per carb.

Dually Update Kits include all components needed to update a regular Pro-Mount kit to Dually specifications.

All kits are listed and intended for specific purposes.  For example, a twin Dually Kit cannot be made from two twin cylinder kits or one four cylinder kit.  The kit contents are different.

Installation Photos: 
               Keihin Carb                        Rack Style Carb using Remote Mount